View TLC77_9098796.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com slvs087m ? december 1994 ? revised march 2012 micropower supply voltage supervisors check for samples: TLC7701, TLC7725, TLC7703 , TLC7733, TLC7705 1 features ? power-on reset generator ? automatic reset generation after voltage drop ? precision voltage sensor ? temperature-compensated voltage reference ? programmable delay time by external capacitor ? supply voltage range . . . 2 v to 6 v ? defined reset output from v dd 1 v ? power-down control support for static ram with battery backup ? maximum supply current of 16 a ? power saving totem-pole outputs ? temperature range . . . up to ? 55 c to 125 c applications ? medical imaging description the TLC77xx family of micropower supply voltage supervisors provide reset control, primarily in microcomputer and microprocessor systems. during power-on, reset is asserted when v dd reaches 1 v. after minimum v dd ( 2 v) is established, the circuit monitors sense voltage and keeps the reset outputs active as long as sense voltage (v i(sense) ) remains below the threshold voltage. an internal timer delays return of the output to the inactive state to ensure proper system reset. the delay time, t d , is determined by an external capacitor: t d = 2.1 10 4 c t where c t is in farads t d is in seconds spacer except for the TLC7701, which can be customized with two external resistors, each supervisor has a fixed sense threshold voltage set by an internal voltage divider. when sense voltage drops below the threshold voltage, the outputs become active and stay in that state until sense voltage returns above threshold voltage and the delay time, t d , has expired. 1 please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. production data information is current as of publication date. copyright ? 1994 ? 2012, texas instruments incorporated products conform to specifications per the terms of the texas instruments standard warranty. production processing does not necessarily include testing of all parameters. drb package
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 slvs087m ? december 1994 ? revised march 2012 www.ti.com these devices have limited built-in esd protection. the leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the mos gates. description (continued) in addition to the power-on-reset and undervoltage-supervisor function, the TLC77xx adds power-down control support for static ram. when control is tied to gnd, reset will act as active high. the voltage monitor contains additional logic intended for control of static memories with battery backup during power failure. by driving the chip select ( cs) of the memory circuit with the reset output of the TLC77xx and with the control driven by the memory bank select signal ( csh1) of the microprocessor (see figure 10 ), the memory circuit is automatically disabled during a power loss. (in this application the TLC77xx power has to be supplied by the battery.) the TLC77xxi is characterized for operation over a temperature range of ? 40 c to 85 c; the TLC77xxq is characterized for operation over a temperature range of ? 40 c to 125 c; and the TLC77xxm is characterized for operation over the full military temperature range of ? 55 c to 125 c. the 3x3 mm drb package is also available as a non-magnetic package for medical imaging application. available options packaged devices threshold thin shrink chip ceramic ceramic small outline voltage t a plastic dip small carrier dip dual small outline no lead (v) outline (d) (1) (p) (drb) (fk) (jg) flatpack (u) (pw) (2) 1.1 tclc7701id ? ? ? tclc7701ip tclc7701ipwr ? 2.25 TLC7725id ? ? ? TLC7725ip TLC7725ipwr ? 2.63 TLC7703id ? ? ? TLC7703ip TLC7703ipwr ? ? 40 c to 85 c 2.93 TLC7733id ? ? ? TLC7733ip TLC7733ipwr ? 4.55 TLC7705id ? ? ? TLC7705ip TLC7705ipwr ? 1.1 TLC7701idbr ? ? ? ? ? TLC7701idrbt-nm 1.1 TLC7701qd ? ? ? TLC7701qp TLC7701qpwr ? 2.25 TLC7725qd ? ? ? TLC7725qp TLC7725qpwr ? ? 40 c to 2.63 TLC7703qd ? ? ? TLC7703qp TLC7703qpwr ? 125 c 2.93 TLC7733qd ? ? ? TLC7733qp TLC7733qpwr ? 4.55 TLC7705qd ? ? ? TLC7705qp TLC7705qpwr ? 2.93 ? ? ? ? ? ? ? ? 55 c to 125 c 4.55 ? ? ? ? ? ? ? (1) the d package is available taped and reeled. add the suffix r to the device type when ordering (e.g., TLC7705qdr). (2) the pw package is only available left-end taped and reeled (indicated by the r suffix on the device type; e.g., TLC7705qpwr). table 1. function table cont resin v i(sense) > v it+ rese reset rol t l l false h l l l true h l l h false h l l h true l (1) h (1) h l false h l h l true h l h h false h l h h true h h (1) (1) reset and reset states shown are valid for t > t d . 2 submit documentation feedback copyright ? 1994 ? 2012, texas instruments incorporated product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com slvs087m ? december 1994 ? revised march 2012 logic symbol (1) this symbol is in accordance with ansi/ieee std 91-1984 and iec publication 617-12. copyright ? 1994 ? 2012, texas instruments incorporated submit documentation feedback 3 product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 slvs087m ? december 1994 ? revised march 2012 www.ti.com functional block diagram timing diagram 4 submit documentation feedback copyright ? 1994 ? 2012, texas instruments incorporated product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com slvs087m ? december 1994 ? revised march 2012 absolute maximum ratings (1) over operating free-air temperature range (unless otherwise noted) value unit v dd supply voltage (2) 7 v input voltage range, control, resin, sense (2) ? 0.3 to 7 v i ol maximum low output current 10 ma i oh maximum high output current, ? 10 ma i ik input clamp current, (vi < 0 or vi > vdd) 10 ma i ok output clamp current, (vo 0 or vo > vdd) 10 ma continuous total power dissipation see dissipation rating table tl77xxi ? 40 to 84 c operating free-air t a tl77xxq ? 40 to 125 c temperature range tl77xxm ? 55 to 125 c t stg storage temperature range ? 65 to 150 c (1) stresses beyond those listed under " absolute maximum ratings " may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under " recommended operating conditions " is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) all voltage values are with respect to gnd. dissipation ratings t a 25 c derating factor t a = 85 c t a = 125 c package power rating above t a = 25 c power rating power rating d 725 mw 5.8 mw/ c 377 mw 145 mw drb fk 1375 mw 11.0 mw/ c 715 mw 275 mw jg 1050 mw 8.4 mw/ c 546 mw 210 mw p 1000 mw 8.0 mw/ c 520 mw 200 mw pw 525 mw 4.2 mw/ c 273 mw 105 mw u 700 mw 5.5 mw/ c 370 mw 150 mw recommended operating conditions at specified temperature range min max unit v dd supply voltage 2 6 v v i input voltage 0 v dd v v ih high-level input voltage at resin and control (1) 0.7 v dd v v il low-level input voltage at resin and control (1) 0.2 v dd v i oh high-level output current ? 2 ma i ol low-level output current 2 ma t/ v input transition rise and fall rate at resin and control 100 ns/ v TLC77xxi ? 40 85 operating free-air t a TLC77xxq ? 40 125 c temperature range TLC77xxm ? 55 125 (1) to ensure a low supply current, v il should be kept < 0.3 v and v ih > v dd ? 0.3 v. copyright ? 1994 ? 2012, texas instruments incorporated submit documentation feedback 5 product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 slvs087m ? december 1994 ? revised march 2012 www.ti.com electrical characteristics over recommended operating conditions (1) (unless otherwise noted) TLC77xx parameter test conditions unit min typ max v dd = 2 v 1.8 i oh = ? 20 a v dd = 2.7 v 2.5 high-level output v oh v voltage v dd = 4.5 v 4.3 i oh = 2 ? ma v dd = 4.5 v 3.7 v dd = 2 v 0.2 i ol = 20 a v dd = 2.7 v 0.2 low-level output v ol v voltage v dd = 4.5 v 0.2 i ol = 2 ma v dd = 4.5 v 0.5 tclc7701 1.04 1.1 1.16 TLC7725 2.18 2.25 2.32 negative-going input threshold voltage, v it ? TLC7703 v dd = 2 v to 6 v 2.56 2.63 2.70 mv sense (2) TLC7733 2.86 2.93 3 TLC7705 4.47 4.55 4.63 tclc7701 30 TLC7725 v hus hysteresis voltage, sense TLC7703 v dd = 2 v to 6 v mv 70 TLC7733 TLC7705 v res power-up reset voltage (3) i ol = 20 a 1 v resin v i = 0 v to v dd 2 control v i = v dd 7 15 i i input current a sense v i = 5 v 5 10 sense, TLC7701 only v i = 5 v 2 resin = v dd , sense = v dd v it max + 0.2 v, i dd supply current 9 16 a control = 0 v, outputs open vdd = 5 v, v ct = 0, i dd(d) supply current during t d resin = v dd , sense = v dd , 120 150 a control = 0 v, outputs open c i input capacitance, sense v i = 0 v to v dd 50 pf (1) all characteristics are measured with c t = 0.1 f. (2) to ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 mf) should be connected near the supply terminals. (3) the lowest supply voltage at which reset becomes active. the symbol v res is not currently listed within eia or jedec standards for semiconductor symbology. rise time of v dd 15 s/v. 6 submit documentation feedback copyright ? 1994 ? 2012, texas instruments incorporated product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com slvs087m ? december 1994 ? revised march 2012 electrical characteristics over recommended operating conditions (1) (unless otherwise noted) TLC77xxm parameter test conditions unit min typ (2) max t a = 25 c 1.8 v dd = 2 v v t a = ? 55 c to 125 c 1.7 t a = 25 c 2.5 i oh = ? 20 a v dd = 2.7 v v t a = ? 55 c to 125 c 2.3 high-level output v oh voltage t a = 25 c 4.3 v dd = 4.5 v v t a = ? 55 c to 125 c 4.2 t a = 25 c 3.7 i oh = ? 2 a v dd = 4.5 v v t a = ? 55 c to 125 c 3.6 t a = 25 c 0.2 v dd = 2 v v t a = ? 55 c to 125 c 0.2 t a = 25 c 0.2 i ol = ? 20 a v dd = 2.7 v v t a = ? 55 c to 125 c 0.2 low-level output v ol voltage t a = 25 c 0.2 v dd = 4.5 v v t a = ? 55 c to 125 c 0.2 i ol = 2 ma t a = 25 c 0.5 v dd = 4.5 v v t a = ? 55 c to 125 c 0.5 TLC7733 2.86 2.93 3.1 negative-going input threshold v it ? v dd = 2 v to 6 v v voltage, sense (3) TLC7705 4.3 4.5 4.8 v hys hysteresis voltage, sense v dd = 2 v to 6 v 70 mv v res power-up reset voltage (2) i ol = 20 a 1 v resin v i = 0 v to v dd 2 control v i = v dd 7 15 i i input current a sense v i = 5 v 5 10 sense, TLC7701 only v i = 5 v 2 resin = vdd, sense = v dd v it max + 0.2 v i dd supply current 9 16 a control = 0 v, outputs open TLC7733 v ct = 0 , v dd = 3.3 v 250 resin = v dd , 120 150 i dd(d) supply current during t d control = 0 v, a TLC7705 v dd = 5 v sense = v dd , outputs open c i input capacitance, sense v i = 0 v to v dd 50 pf (1) all characteristics are measured with c t = 0.1 f. (2) typical values apply at t a = 25 c. (3) to ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 mf) should be connected near the supply terminals. copyright ? 1994 ? 2012, texas instruments incorporated submit documentation feedback 7 product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 slvs087m ? december 1994 ? revised march 2012 www.ti.com switching characteristics at v dd = 5 v, r l = 2 k , c l = 50 pf, t a = 25 c (unless otherwise noted) measured TLC77xx parameter test conditions unit from to min typ max (input) (output) reset resin = 0.7 v dd , t d delay time v i(sense) v it+ and control = 0.2 v dd , c t = 100 nf, 1.1 2.1 4.2 ms reset t a = full range, see timing diagram propagation delay time, low- t plh 20 to-high-level output reset propagation delay time, high- t phl 5 v ih = v it+ max + 0.2 v, v il = v it- min ? 0.2 v, to-low-level output sense resin = 0.7 v dd , control = 0.2 v dd , s propagation delay time, low- ct = nc (1) t plh 5 to-high-level output reset propagation delay time, high- t phl 20 to-low-level output propagation delay time, low- t plh 20 s to-high-level output reset propagation delay time, high- v ih = 0.7 v dd , v il = 0.2 v dd , t phl 40 to-low-level output sense = v it+ max + 0.2 v, resin ns control = 0.2 v dd , propagation delay time, low- t plh 45 ct = nc (1) to-high-level output reset propagation delay time, high- t phl 20 s to-low-level output propagation delay time, low- t plh 38 ns v ih = 0.7 v dd , v il = 0.2 v dd , to-high-level output control reset sense = v it+ max + 0.2 v, resin = 0.7 v dd , propagation delay time, high- ct = nc (1) t phl 38 ns to-low-level output low-level minimum pulse sense v ih = v it+ max + 0.2 v, v il = v it- min ? 0.2 v, duration to switch reset resin v il = 0.2 v dd , v ih = 0.7 v dd and reset t r rise time reset 10% to 90% and t f fall time 90% to 10% reset (1) nc = no capacitor, and includes up to 100-pf probe and jig capacitance. 8 submit documentation feedback copyright ? 1994 ? 2012, texas instruments incorporated product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com slvs087m ? december 1994 ? revised march 2012 switching characteristics at v dd = 5 v, r l = 2 k , c l = 50 pf, t a = 25 c (unless otherwise noted) measured TLC77xxm parameter test conditions t a unit from to min typ max (input) (output) reset resin = 2.7 v, control = 0.4 v, t d delay time v i(sense) v it+ and full range 1.1 2.1 4.2 ms c t = 100 nf, see timing diagram reset 25 c 20 v ih = v it+ max + 0.2 v, reset s propagation delay full range 24 v il = v it-min - 0.2 v, t plh time, low-to-high-level sense resin = 2.7 v, control = 0.4 v, 25 c 5 output reset s ct = nc (1) full range 7 25 c 5 v ih = v it+ max + 0.2 v, reset s propagation delay full range 7 v il = v it-min - 0.2 v, t phl time, high-to-low-level sense resin = 2.7 v, control = 0.4 v, 25 c 20 output reset s ct = nc (1) full range 24 25 c 20 v ih = 2.7 v, v il = 0.4 v, reset s propagation delay full range 24 sense = v it+ max + 0.2 v, t plh time, low-to-high-level resin control = 0.4 v, 25 c 45 output reset ns ct = nc (1) full range 65 25 c 40 v ih = 2.7 v, v il = 0.4 v, reset ns propagation delay full range 60 sense = v it+ max + 0.2 v, t phl time, high-to-low-level resin control = 0.4 v, 25 c 20 output reset s ct = nc (1) full range 24 propagation delay 25 c 38 t plh time, low-to-high-level ns v ih = 2.7 v, v il = 0.4 v, full range 58 output sense = v it+ max + 0.2 v, control reset resin = 2.7 v, propagation delay 25 c 38 ct = nc (1) t phl time, high-to-low-level ns full range 58 output v ih = v it+ max + 0.2 v, sense 3 low-level minimum v il = v it-min - 0.2 v full range s pulse duration resin v il = 0.4 v, v ih = 2.7 v 1 t r rise time reset 10% to 90% 8 and full range ns/v t f fall time 90% to 10% 4 reset (1) nc = no capacitor, and includes up to 100-pf probe and jig capacitance. copyright ? 1994 ? 2012, texas instruments incorporated submit documentation feedback 9 product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 slvs087m ? december 1994 ? revised march 2012 www.ti.com parameter measurement information figure 1. reset and reset output configurations figure 2. input pulse definition waveforms 10 submit documentation feedback copyright ? 1994 ? 2012, texas instruments incorporated product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com slvs087m ? december 1994 ? revised march 2012 typical characteristics normalized input threshold voltage supply current vs vs temperature supply voltage figure 3. figure 4. high-level output voltage low-level output voltage vs vs high-level output current low-level output current figure 5. figure 6. copyright ? 1994 ? 2012, texas instruments incorporated submit documentation feedback 11 product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 slvs087m ? december 1994 ? revised march 2012 www.ti.com typical characteristics (continued) input current minimum pulse duration at sense vs vs input voltage at sense sense threshold overdrive figure 7. figure 8. 12 submit documentation feedback copyright ? 1994 ? 2012, texas instruments incorporated product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 www.ti.com slvs087m ? december 1994 ? revised march 2012 application information figure 9. reset controller in a microcomputer system figure 10. data retention during power down using static cmos rams copyright ? 1994 ? 2012, texas instruments incorporated submit documentation feedback 13 product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
TLC7701, TLC7725, TLC7703 TLC7733, TLC7705 slvs087m ? december 1994 ? revised march 2012 www.ti.com changes from revision l (february 2003) to revision m page ? updated the drb package pin out dimensions and ordering information. ........................................................................ 1 14 submit documentation feedback copyright ? 1994 ? 2012, texas instruments incorporated product folder link(s): TLC7701, TLC7725, TLC7703 TLC7733, TLC7705
package option addendum www.ti.com 24-sep-2015 addendum-page 1 packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples 5962-9750901q2a active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9750901q2a TLC7733 mfkb 5962-9750901qpa active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9750901qpa TLC7733m 5962-9751301q2a active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9751301q2a TLC7705 mfkb 5962-9751301qha active cfp u 10 1 tbd a42 n / a for pkg type -55 to 125 9751301qha TLC7705m 5962-9751301qpa active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9751301qpa TLC7705m TLC7701id active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7701i TLC7701idg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7701i TLC7701idr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7701i TLC7701idrbt-nm active son drb 8 250 green (rohs & no sb/br) cu sn level-2-260c-1 year -40 to 125 7701n TLC7701idrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7701i TLC7701ip active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 85 TLC7701ip TLC7701ipw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7701 TLC7701ipwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7701 TLC7701ipwle obsolete tssop pw 8 tbd call ti call ti -40 to 85 TLC7701ipwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7701 TLC7701ipwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7701
package option addendum www.ti.com 24-sep-2015 addendum-page 2 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples TLC7701qd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7701q TLC7701qdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7701q TLC7701qdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7701q TLC7701qdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7701q TLC7701qp active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 125 TLC7701qp TLC7701qpw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td701 TLC7701qpwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td701 TLC7701qpwle preview tssop pw 8 tbd call ti call ti -40 to 125 TLC7701qpwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td701 TLC7701qpwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td701 TLC7703-w active wafersale ys 0 tbd call ti call ti TLC7703id active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7703i TLC7703idg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7703i TLC7703idr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7703i TLC7703idrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7703i TLC7703ip active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 85 TLC7703ip TLC7703ipw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7703 TLC7703ipwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7703 TLC7703ipwle obsolete tssop pw 8 tbd call ti call ti -40 to 85
package option addendum www.ti.com 24-sep-2015 addendum-page 3 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples TLC7703ipwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7703 TLC7703ipwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7703 TLC7703qd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7703q TLC7703qdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7703q TLC7703qpw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td703 TLC7703qpwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td703 TLC7705id active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7705i TLC7705idg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7705i TLC7705idr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7705i TLC7705idrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7705i TLC7705ip active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 85 TLC7705ip TLC7705ipe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 85 TLC7705ip TLC7705ipw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7705 TLC7705ipwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7705 TLC7705ipwle obsolete tssop pw 8 tbd call ti call ti -40 to 85 TLC7705ipwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7705 TLC7705ipwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7705 TLC7705mfkb active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9751301q2a TLC7705
package option addendum www.ti.com 24-sep-2015 addendum-page 4 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples mfkb TLC7705mjg active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 TLC7705 mjg TLC7705mjgb active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9751301qpa TLC7705m TLC7705mub active cfp u 10 1 tbd a42 n / a for pkg type -55 to 125 9751301qha TLC7705m TLC7705qd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7705q TLC7705qdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7705q TLC7705qdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7705q TLC7705qdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7705q TLC7705qpw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td705 TLC7705qpwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td705 TLC7705qpwle obsolete tssop pw 8 tbd call ti call ti -40 to 125 TLC7705qpwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td705 TLC7705qpwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td705 TLC7725id active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7725i TLC7725idg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7725i TLC7725idr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7725i TLC7725idrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7725i TLC7725ip active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 85 TLC7725ip TLC7725ipw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7725
package option addendum www.ti.com 24-sep-2015 addendum-page 5 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples TLC7725ipwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7725 TLC7725ipwle obsolete tssop pw 8 tbd call ti call ti -40 to 85 TLC7725ipwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7725 TLC7725qd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7725q TLC7725qdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7725q TLC7725qdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7725q TLC7725qpwle obsolete tssop pw 8 tbd call ti call ti -40 to 125 TLC7725qpwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td725 TLC7725qpwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td725 TLC7733id active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7733i TLC7733idg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7733i TLC7733idr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7733i TLC7733idrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 c7733i TLC7733ip active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 85 TLC7733ip TLC7733ipe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 85 TLC7733ip TLC7733ipw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7733 TLC7733ipwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim y7733 TLC7733ipwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7733 TLC7733ipwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 y7733
package option addendum www.ti.com 24-sep-2015 addendum-page 6 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples TLC7733mfkb active lccc fk 20 1 tbd post-plate n / a for pkg type -55 to 125 5962- 9750901q2a TLC7733 mfkb TLC7733mjg active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 TLC7733 mjg TLC7733mjgb active cdip jg 8 1 tbd a42 n / a for pkg type -55 to 125 9750901qpa TLC7733m TLC7733qd active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7733q TLC7733qdg4 active soic d 8 75 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7733q TLC7733qdr active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7733q TLC7733qdrg4 active soic d 8 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 c7733q TLC7733qp active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 125 TLC7733qp TLC7733qpe4 active pdip p 8 50 pb-free (rohs) cu nipdau n / a for pkg type -40 to 125 TLC7733qp TLC7733qpw active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td733 TLC7733qpwg4 active tssop pw 8 150 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td733 TLC7733qpwr active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td733 TLC7733qpwrg4 active tssop pw 8 2000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 125 td733 (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device.
package option addendum www.ti.com 24-sep-2015 addendum-page 7 (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. - the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. (4) there may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) multiple device markings will be inside parentheses. only one device marking contained in parentheses and separated by a "~" will appear on a device. if a line is indented then it is a continuation of the previous line and the two combined represent the entire device marking for that device. (6) lead/ball finish - orderable devices may have multiple material finish options. finish options are separated by a vertical ruled line. lead/ball finish values may wrap to two lines if the finish value exceeds the maximum column width. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. other qualified versions of TLC7701, TLC7705, TLC7705m, TLC7733, TLC7733m : ? catalog: TLC7705 , TLC7733 ? automotive: TLC7701-q1 , TLC7705-q1 , TLC7705-q1 , TLC7733-q1 , TLC7733-q1 ? enhanced product: TLC7701-ep , TLC7705-ep , TLC7705-ep , TLC7733-ep , TLC7733-ep ? military: TLC7705m , TLC7733m note: qualified version definitions:
package option addendum www.ti.com 24-sep-2015 addendum-page 8 ? catalog - ti's standard catalog product ? automotive - q100 devices qualified for high-reliability automotive applications targeting zero defects ? enhanced product - supports defense, aerospace and medical applications ? military - qml certified for military and defense applications
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant TLC7701idr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7701idrbt-nm son drb 8 250 180.0 12.4 3.3 3.3 1.1 8.0 12.0 q2 TLC7701ipwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7701qdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7701qpwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7703idr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7703ipwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7705idr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7705ipwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7705qdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7705qpwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7725idr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7725ipwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7725qdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7725qpwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7733idr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7733ipwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 TLC7733qdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 package materials information www.ti.com 13-feb-2016 pack materials-page 1
device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant TLC7733qdr soic d 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 q1 TLC7733qpwr tssop pw 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 q1 *all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) TLC7701idr soic d 8 2500 367.0 367.0 38.0 TLC7701idrbt-nm son drb 8 250 210.0 185.0 35.0 TLC7701ipwr tssop pw 8 2000 367.0 367.0 35.0 TLC7701qdr soic d 8 2500 367.0 367.0 38.0 TLC7701qpwr tssop pw 8 2000 367.0 367.0 35.0 TLC7703idr soic d 8 2500 367.0 367.0 38.0 TLC7703ipwr tssop pw 8 2000 367.0 367.0 35.0 TLC7705idr soic d 8 2500 367.0 367.0 38.0 TLC7705ipwr tssop pw 8 2000 367.0 367.0 35.0 TLC7705qdr soic d 8 2500 367.0 367.0 38.0 TLC7705qpwr tssop pw 8 2000 367.0 367.0 35.0 TLC7725idr soic d 8 2500 367.0 367.0 38.0 TLC7725ipwr tssop pw 8 2000 367.0 367.0 35.0 TLC7725qdr soic d 8 2500 367.0 367.0 38.0 TLC7725qpwr tssop pw 8 2000 367.0 367.0 35.0 package materials information www.ti.com 13-feb-2016 pack materials-page 2
device package type package drawing pins spq length (mm) width (mm) height (mm) TLC7733idr soic d 8 2500 367.0 367.0 35.0 TLC7733ipwr tssop pw 8 2000 367.0 367.0 35.0 TLC7733qdr soic d 8 2500 367.0 367.0 35.0 TLC7733qdr soic d 8 2500 367.0 367.0 38.0 TLC7733qpwr tssop pw 8 2000 367.0 367.0 35.0 package materials information www.ti.com 13-feb-2016 pack materials-page 3
mechanical data mcer001a january 1995 revised january 1997 post office box 655303 ? dallas, texas 75265 jg (r-gdip-t8) ceramic dual-in-line 0.310 (7,87) 0.290 (7,37) 0.014 (0,36) 0.008 (0,20) seating plane 4040107/c 08/96 5 4 0.065 (1,65) 0.045 (1,14) 8 1 0.020 (0,51) min 0.400 (10,16) 0.355 (9,00) 0.015 (0,38) 0.023 (0,58) 0.063 (1,60) 0.015 (0,38) 0.200 (5,08) max 0.130 (3,30) min 0.245 (6,22) 0.280 (7,11) 0.100 (2,54) 0 15 notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. this package can be hermetically sealed with a ceramic lid using glass frit. d. index point is provided on cap for terminal identification. e. falls within mil std 1835 gdip1-t8

www.ti.com package outline c typ 6.6 6.2 1.2 max 6x 0.65 8x 0.30 0.19 2x 1.95 0.15 0.05 (0.15) typ 0 - 8 0.25 gage plane 0.75 0.50 a note 3 3.1 2.9 b note 4 4.5 4.3 4221848/a 02/2015 tssop - 1.2 mm max height pw0008a small outline package notes: 1. all linear dimensions are in millimeters. any dimensions in parenthesis are for reference only. dimensioning and tolerancing per asme y14.5m. 2. this drawing is subject to change without notice. 3. this dimension does not include mold flash, protrusions, or gate burrs. mold flash, protrusions, or gate burrs shall not exceed 0.15 mm per side. 4. this dimension does not include interlead flash. interlead flash shall not exceed 0.25 mm per side. 5. reference jedec registration mo-153, variation aa. 1 8 0.1 c a b 5 4 pin 1 id area seating plane 0.1 c see detail a detail a typical scale 2.800
www.ti.com example board layout (5.8) 0.05 max all around 0.05 min all around 8x (1.5) 8x (0.45) 6x (0.65) (r ) typ 0.05 4221848/a 02/2015 tssop - 1.2 mm max height pw0008a small outline package symm symm land pattern example scale:10x 1 4 5 8 notes: (continued) 6. publication ipc-7351 may have alternate designs. 7. solder mask tolerances between and around signal pads can vary based on board fabrication site. metal solder mask opening non solder mask defined solder mask details not to scale solder mask opening metal under solder mask solder mask defined
www.ti.com example stencil design (5.8) 6x (0.65) 8x (0.45) 8x (1.5) (r ) typ 0.05 4221848/a 02/2015 tssop - 1.2 mm max height pw0008a small outline package notes: (continued) 8. laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. ipc-7525 may have alternate design recommendations. 9. board assembly site may have different recommendations for stencil design. symm symm 1 4 5 8 solder paste example based on 0.125 mm thick stencil scale:10x

important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per jesd46, latest issue, and to discontinue any product or service per jesd48, latest issue. buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all semiconductor products (also referred to herein as ? components ? ) are sold subject to ti ? s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in ti ? s terms and conditions of sale of semiconductor products. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. ti assumes no liability for applications assistance or the design of buyers ? products. buyers are responsible for their products and applications using ti components. to minimize the risks associated with buyers ? products and applications, buyers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which ti components or services are used. information published by ti regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of significant portions of ti information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. ti is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ti components or services with statements different from or beyond the parameters stated by ti for that component or service voids all express and any implied warranties for the associated ti component or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of ti components in its applications, notwithstanding any applications-related information or support that may be provided by ti. buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. buyer will fully indemnify ti and its representatives against any damages arising out of the use of any ti components in safety-critical applications. in some cases, ti components may be promoted specifically to facilitate safety-related applications. with such components, ti ? s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. nonetheless, such components are subject to these terms. no ti components are authorized for use in fda class iii (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. only those ti components which ti has specifically designated as military grade or ? enhanced plastic ? are designed and intended for use in military/aerospace applications or environments. buyer acknowledges and agrees that any military or aerospace use of ti components which have not been so designated is solely at the buyer ' s risk, and that buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti has specifically designated certain components as meeting iso/ts16949 requirements, mainly for automotive use. in any case of use of non-designated products, ti will not be responsible for any failure to meet iso/ts16949. products applications audio www.ti.com/audio automotive and transportation www.ti.com/automotive amplifiers amplifier.ti.com communications and telecom www.ti.com/communications data converters dataconverter.ti.com computers and peripherals www.ti.com/computers dlp ? products www.dlp.com consumer electronics www.ti.com/consumer-apps dsp dsp.ti.com energy and lighting www.ti.com/energy clocks and timers www.ti.com/clocks industrial www.ti.com/industrial interface interface.ti.com medical www.ti.com/medical logic logic.ti.com security www.ti.com/security power mgmt power.ti.com space, avionics and defense www.ti.com/space-avionics-defense microcontrollers microcontroller.ti.com video and imaging www.ti.com/video rfid www.ti-rfid.com omap applications processors www.ti.com/omap ti e2e community e2e.ti.com wireless connectivity www.ti.com/wirelessconnectivity mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2016, texas instruments incorporated

▲Up To Search▲

Price & Availability of TLC77

	To Download TLC77 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .